How EVs Are Changing Automotive Test and Measurement
An internal combustion engine relies on a single coolant
loop. An EV must precisely control the temperature of its battery pack, motor,
and power electronics. Testing these systems means tracking low-frequency
vibration in coolant lines and thermal connections alongside dynamic inputs
from pumps and fans.
Silicon Designs MEMS DC Accelerometers measure from DC up to
4,000+ Hz, depending on range, so one sensor captures both static displacement
and dynamic vibration. Models such as the 2220/2276
and 2470/2476
are individually temperature-tested for stable output through hot and cold test
cycles from -55°C to +125°C.
Brake blending
requires clear measurement data
EVs blend regenerative and hydraulic braking, and the
handoff between them must stay smooth, especially in emergency stops. Engineers
need to see exactly how the system behaves in gradual braking and sudden
deceleration.
Mounted on the brake pedal, chassis, and brake components,
MEMS DC Accelerometers measure that transition precisely. DC response is
essential here: it captures the sustained g-force of hard braking, not just the
vibration around it.
Safety testing goes
beyond the crash
Standard crash evaluations still apply to EVs, but battery
systems need closer scrutiny. An EV's weight distribution and power delivery
also change how it behaves in collisions and rollovers.
SDI's test
and measurement modules are rated for mechanical shock up to 5,000 g,
depending on range. They survive the impact and keep measuring the
low-amplitude vibration and structural deformation that follow.
Rethinking NVH for a
quieter ride
Without engine noise to mask them, road noise, wind, and
motor whine become far more noticeable. Much of what drivers feel starts as
low- to mid-frequency, structure-borne vibration from the road, suspension and
mounts.
With DC response and low noise, MEMS DC Accelerometers give
engineers a clean view of that vibration, helping trace cabin noise to its
source and evaluate damping materials.
Don't compromise on
EV test data
The shift to EVs is a major engineering challenge, and your
test tools shouldn't be the limiting factor. Silicon Designs MEMS DC
Accelerometers are designed, built, and calibrated in the USA for the precision
and durability EV testing demands.
Meet us at the expo to talk with our team about
your EV testing challenges.


)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)

)
)
)